Academy » Lean Foundations

Lean Foundations — Lesson 7: TPM and Autonomous Maintenance: Machines That Don't Surprise You

Lean Foundations · 4 min read · 18.09.2026

The seventh lesson of the Lean Basics series. So far we've dealt with material flow and the way work is done — waste, 5S, pull production, standards. Today it's the machines' turn. Why they break down, why they sit idle — and why you then have to rush orders even though you have plenty of capacity on paper. You'll learn to calculate OEE, get to know the six big losses of machines, and launch autonomous maintenance so that operators and maintenance technicians pull in the same direction.

OEE: One Number That Tells the Truth About a Machine

Ask a supervisor whether the machines are running. You'll hear “yes, normally.” When you ask for a number, the conversation stops. That's exactly what overall equipment effectiveness (OEE) is for: it multiplies availability, performance, and quality.

A real-life example. A CNC lathe, a twelve-hour shift, 720 minutes. Due to breakdowns the machine sat idle for 100 minutes; minor stoppages and adjustments added another 140. It ran 66.7% of the time, produced at 90% of the planned cycle time, and 4% of parts went to scrap. OEE = 0.667 × 0.90 × 0.96 = 58%.

A machine that “runs constantly” thus produced 58% of what it could have. World class hovers around 85%. Czech and Slovak plants mostly land between 40% and 60%. The difference is capacity you've already paid for and aren't using.

Six Losses That Eat Your Capacity

TPM — total productive maintenance — divides machine losses into six groups:

  1. Breakdowns and unplanned repairs.
  2. Changeover and production setup.
  3. Minor stoppages. They last seconds to minutes and nobody records them.
  4. Reduced speed — the machine runs, but slower than the standard allows.
  5. Losses at production startup and shutdown.
  6. Quality defects and rework.

Most companies measure only items 1 and 6. The losses in between remain invisible. At one 40-person machining company, we measured that minor stoppages took up 23% of shift time — without a single recorded line. We covered changeover in the lesson on SMED; today we're dealing with the rest.

Autonomous Maintenance: The Machine Belongs to the Operator

You know the classic model: the operator produces, maintenance repairs, and in between there's a dispute over who broke what. Autonomous maintenance changes that. The operator is the first line of defense for their machine — cleaning it, checking it, lubricating it, and tightening whatever falls within their competence. Ten to fifteen minutes a day, according to a written standard.

Whoever cleans the machine sees the breakdown coming. Whoever just pushes the button finds out only once the carts have stopped.

Cleaning isn't cosmetics, it's inspection. Whoever removes chips and oil from the hydraulic unit with their own hands will notice a cracked hose, a loose screw, a leaking seal. On a dirty machine, none of that is visible.

The tools are red and white tags. Red means “maintenance must handle it,” white means “production can handle it themselves.” During the first cleaning of a press shop at one client, operators tagged 47 defects in three hours. Eleven of them were the causes of stoppages that had plagued the press all year.

Who Does What

Autonomous maintenance doesn't mean the operator disassembles a gearbox. Agree on a competence matrix: the operator handles tasks requiring no tools and no qualification — inspection, lubrication at prescribed points, cleaning. The rest goes to maintenance according to a plan, not only after a breakdown. We showed how to write the procedure into a standard in the lesson on standardized work. The CIL card (clean — inspect — lubricate) belongs in it just as much as the control plan does.

How to Start in Four Weeks

  1. Week 1: pick the machine with the worst availability and measure its OEE daily. Rough numbers are enough.
  2. Week 2: initial cleaning together with the operator; tag every finding.
  3. Week 3: eliminate the worst sources of dirt and create the first ten-minute daily CIL card.
  4. Week 4: training; the card enters the shift standard. After a month, compare OEE.

This Week's Exercise

Pick the machine that stops most often. Arrange 30 minutes with the operator and do the initial cleaning together. Attach a tag to every defect — an oil leak, a crack, a loose screw, a missing guard. At the end, count the findings and sort them into red and white. Most teams are surprised by how many faults were visible long before the machine went down. That list is your first maintenance plan — sorted by reality, not by guesswork.

Key Takeaways

  • OEE = availability × performance × quality. Measure one machine before you buy a new one.
  • Six machine losses: companies most often measure only breakdowns and scrap; the rest slips away.
  • Autonomous maintenance = the operator cleans, inspects, and lubricates according to a CIL card, 10–15 minutes a day.
  • Start with one machine and four weeks, not with an audit of the whole plant.

If you want to master lean methods — including TPM, OEE measurement, and hands-on machine workshops — check out the Foreast Academy e-learning offer.

Next lesson: kaizen and the small improvements that add up. Autonomous maintenance will bring you a list of dozens of defects. Kaizen is the way to eliminate them systematically, one by one.


Quiz — test your knowledge


« Lesson 6  |  Lesson 8 »

« Back to the academy