Blog » Costs

Energy at up to 40% of operating costs: convert kWh into cost per piece

Costs · 6 min read · 29.10.2026

The electricity bill has jumped 15% year on year, and in the meeting someone asks which machine is causing it. Silence. The compressor is running, the furnaces are firing, the foreman shrugs: electricity sits in overhead and the entire plant is measured by a single meter. Now you have a problem bigger than the bill itself. You don't know which product is eating into your margin.

The news keeps reporting that energy will swallow up to 40% of manufacturers' operating costs, and industry is calling for price reform. At Foreast, in our cost reduction projects we keep seeing the same picture: one main meter, energy hidden in overhead. Waiting for reform is not a strategy. kWh can be converted into cost per piece with a simple estimate, without expensive metering. And those numbers then directly drive decisions about prices, mix, and investments.

A single meter can't tell you where your margin is leaking

The main meter tells you the total, not the location. A plant consuming 2.4 GWh a year at €0.20/kWh pays €480,000. The difference between a company that knows where those gigawatt-hours go and one that doesn't is the difference between managing and guessing.

Start with a map of the twenty biggest consumers. You can do it in one afternoon. Walk the hall with a tablet and, for each piece of equipment, note the rated power from the nameplate, an estimate of running hours, and the control method. In a typical machine shop, the same suspects appear in the top twenty: the compressor, furnaces and dryers, welding robots, cooling, HVAC, and ventilation. The 80/20 rule applies mercilessly — three to five pieces of equipment make up the overwhelming majority of the bill.

A classic example. A 75 kW screw compressor, 6,000 running hours a year, average load 60%. Multiply. 270 MWh, €54,000 a year. One piece of equipment, no meter, one walk through the hall. A number like that changes the tone of the meeting: "energy is expensive" becomes "the compressor costs us as much as two lathe operators".

A single meter tells you how much you pay. Converting kWh to cost per piece tells you which product has to pay for it.

kWh per piece without investing in metering

From an equipment estimate to a product estimate, three inputs you already have for free: the motor's rated power, cycle time, and utilization. A foreman can handle the calculation in a simple spreadsheet. Average power draw is rated power times the load factor — for motors without speed control, use 0.5 to 0.7. Energy per piece is average power times cycle time divided by 3,600 to convert seconds to hours. You get cost per piece by multiplying by the kWh price including distribution. And continuous consumers — the compressor, HVAC, lighting — allocate to products via machine hours, not gut feel.

Example: a press with a 30 kW motor, a 45-second cycle, 60% load. Stamping consumption is 30 × 0.6 × 45/3,600 = 0.225 kWh per piece. At €0.20/kWh that's 4.5 cents per piece, and at 200,000 pieces a year €9,000 for this machine alone. Add the allocated share of compressed air and heat. Done — you have the product's total energy cost.

An estimate is not a meter. We don't trust it to a tenth of a cent, and we don't need to. Accuracy of ±20% is enough for decision-making: when cost per piece lies somewhere between 3.6 and 5.4 cents, it won't distort the ranking of products in the mix. Only a difference of a cent or more changes it. Those are exactly the cases you're looking for.

When should you buy sub-meters? When the cost of uncertainty exceeds the cost of the meter. A three-phase meter with online monitoring costs €300–600, so the first one belongs on the equipment with both the largest estimate and the greatest uncertainty. Nine times out of ten, that's the compressor station. Then the biggest furnace. Then the most expensive machine on the most heavily utilized line. Meters that won't change any decision are a hobby, not management.

What to do with the numbers — rates, prices, mix, investments

Numbers by themselves won't save you a single euro. The work lies in the decisions that have leaned on the old energy price for years and can be recalculated over a weekend.

First, machine hour rates. If you haven't recalculated them in at least three years, the energy in them dates from a time when a kWh cost half of today's price. Recalculate your most heavily utilized machines and you'll see where you're selling machine time below cost.

Second stop: contracts. Long-term orders at a fixed price without an energy clause need a number you can take to the customer. A calculation based on real kWh is stronger in B2B negotiations than a generic percentage markup.

Third step, product mix. Add margin per kWh to your calculations. Two products with the same margin in euros can have three times different consumption; with energy at nearly 40% of plant operating costs, that's the difference between a product that carries the fixed costs and one that merely warms them up.

And finally, investments. A variable frequency drive on the compressor, heat recovery, or a new furnace are calculated from your numbers, not from catalog promises. A 15% saving on €54,000 is €8,100 a year; with a €20,000 investment, payback comes to two and a half years. A number you can defend to the bank and to the owner.

Headlines will keep reporting percentages and governments will keep promising reforms. Companies that convert kWh into cost per piece in the meantime will make their own decisions. The rest will wait for a reform that may come. But not on time.

Key takeaways

  • A map of the 20 biggest consumers takes one afternoon; three to five pieces of equipment account for the overwhelming majority of the bill.
  • You can calculate kWh per piece from the motor nameplate, cycle time, and load — ±20% accuracy is enough for management decisions.
  • Buy sub-meters based on the cost of uncertainty, not gut feel. The first one belongs on the compressor.
  • Work the result into machine rates, price lists, mix, and investment business cases — otherwise the numbers stay in a spreadsheet.

First step for Monday morning: print out the last twelve months of energy bills, list the ten biggest consumers, and calculate the energy cost per piece of your best-selling product. Three hours of work. You'll know which product holds up the margin and which merely warms it up. Whoever doesn't convert kWh into cost per piece will still be sitting in silence at the meeting a year from now; whoever does will know what to raise prices on, what to drop from the mix, and which investment to back with a number. If you want to go deeper — from cost drivers to compressed air leaks on the shop floor — see how we work on cost reduction.



« Previous article  |  Next article »

« All articles